Entryway storage bench – Align the 2-inch edge of the 3 meter long panels with the face of another to start building the structure of benching. The two sheets of wood should form a right angle. Make sure the edges are flush board. Place the two plates with 4-inch nails. Hammer in a nail every 2-4 inches along the joint of the two pieces.
Place a table 3 feet above the surface of the structure to form a U shape at right angles. A board should have the benefit of two sheets 2 inches of wood on it to keep the bench yet. Place the two plates with 4-inch nails. Hammer in a nail every 2-4 inches along the edge of the two tables. Leave the fourth board 3 feet sideways, as it will be the top of the entryway storage bench.
12 Photos Gallery of: Outdoor Entryway Storage Bench
Place one of the tables 2 feet by 2 feet at the open end of the U-shape to give the bench a closed portion. Place the card on the edges of 2 inches from the bench structure with 4-inch nails. Attach two hinges to a 2-inch edge of the bench 3 feet of storage. Place the hinges of a foot away so the entryway storage bench will open and close smoothly. Attach the hinges to the bench with 2-inch screws.